Hydrolocked the B
TiM-MaY!
Joined: Nov 2002
Posts: 841
Likes: 0
From: Chesapeake/VaBeach
Originally posted by Nates95Accord
pull all your plugs and crank it over spit all that shit out.
pull all your plugs and crank it over spit all that shit out.
Thread Starter
Pro
Joined: Nov 2002
Posts: 833
Likes: 0
From: Suffolk
ok i took about a tablespoon of oil and put it in each cylinder because my uncle said the water crushes the piston rings and they need to be reseated. after about 5 min of cranking and 20 min of it sounding like a harley going down the road everything seems to be fine. i changed oil and plugs...tranny fluid is being changed today. Motor is running strong and no signs of major engine damage. thanks for everyones help. i got lucky , or not so lucky because i was having dreams of eagle h-beam rods and forged pistons 
Registered User
Joined: Nov 2002
Posts: 208
Likes: 0
Originally posted by projsr20det
Before you tow it, drop some auto trans. fluid into the cylinders(not much, about a teaspoon each) and then try to start it. You did "wash" out the cyl.walls, and was only at idle when you sucked up water. Make sure to change the oil before you do. The tranny fluid will lube the cyl and may bring it back, it'll smoke till its burned up though. Its worth a shot.
Before you tow it, drop some auto trans. fluid into the cylinders(not much, about a teaspoon each) and then try to start it. You did "wash" out the cyl.walls, and was only at idle when you sucked up water. Make sure to change the oil before you do. The tranny fluid will lube the cyl and may bring it back, it'll smoke till its burned up though. Its worth a shot.
Thread
Thread Starter
Forum
Replies
Last Post
