Notices
Tech Talk Anything technically related to your vehicle should be posted here. If you're looking to have work done, try one of the Regional Forums.

high rpm shut down

Thread Tools
 
Old Nov 15, 2008 | 07:32 AM
  #1  
cleckner04's Avatar
Thread Starter
fabricating is fun
 
Joined: May 2007
Posts: 865
Likes: 0
From: H-town
cleckner04 is an unknown quantity at this point
Default high rpm shut down

fixed. thanks for the input

Last edited by cleckner04; Nov 17, 2008 at 12:16 PM.
Old Nov 15, 2008 | 08:14 AM
  #2  
brandon.beene's Avatar
Registered Member
 
Joined: Dec 2007
Posts: 520
Likes: 0
brandon.beene can only hope to improve
Default Re: high rpm shut down

maybe your not getting enough or too much fuel. have you tried to check that out ?
Old Nov 15, 2008 | 12:32 PM
  #3  
cleckner04's Avatar
Thread Starter
fabricating is fun
 
Joined: May 2007
Posts: 865
Likes: 0
From: H-town
cleckner04 is an unknown quantity at this point
Default Re: high rpm shut down

i havent check anything like that. i dont see how that has a problem because it happens at the above rpms. i will have it checked and see what the pressure is. but i will have to get back with that stuff.
Old Nov 15, 2008 | 04:15 PM
  #4  
eclispegs2008's Avatar
Registered Member
 
Joined: Feb 2007
Posts: 500
Likes: 0
eclispegs2008 has disabled reputation
Default Re: high rpm shut down

map sensor maybe? Do you have any cel's?
Old Nov 15, 2008 | 05:21 PM
  #5  
ethan82000's Avatar
Registered Member
 
Joined: Mar 2008
Posts: 945
Likes: 0
From: hell
ethan82000 has a reputation beyond reputeethan82000 has a reputation beyond reputeethan82000 has a reputation beyond reputeethan82000 has a reputation beyond reputeethan82000 has a reputation beyond reputeethan82000 has a reputation beyond reputeethan82000 has a reputation beyond reputeethan82000 has a reputation beyond reputeethan82000 has a reputation beyond repute
Default Re: high rpm shut down

well for one thing..if its a stock d16y7..their rev limiter is at 6700rpms..so i dont see how ur pushin it 7k+
Old Nov 15, 2008 | 07:03 PM
  #6  
cleckner04's Avatar
Thread Starter
fabricating is fun
 
Joined: May 2007
Posts: 865
Likes: 0
From: H-town
cleckner04 is an unknown quantity at this point
Default Re: high rpm shut down

Originally Posted by eclispegs2008
map sensor maybe? Do you have any cel's?
no codes. but my speed sensor is going bad because my speedo is going crazy

Originally Posted by ethan82000
well for one thing..if its a stock d16y7..their rev limiter is at 6700rpms..so i dont see how ur pushin it 7k+
well something must be wrong because that is where it is taching out at. 7200 rpms. like i said. its all stock but the tranny. i have a ex cluster in it so i see where it hits the limiter.
Old Nov 15, 2008 | 07:30 PM
  #7  
brandon.beene's Avatar
Registered Member
 
Joined: Dec 2007
Posts: 520
Likes: 0
brandon.beene can only hope to improve
Default Re: high rpm shut down

Originally Posted by cleckner04
no codes. but my speed sensor is going bad because my speedo is going crazy



well something must be wrong because that is where it is taching out at. 7200 rpms. like i said. its all stock but the tranny. i have a ex cluster in it so i see where it hits the limiter.
do you have VTEC?? the fuel saving version
Old Nov 15, 2008 | 10:38 PM
  #8  
cleckner04's Avatar
Thread Starter
fabricating is fun
 
Joined: May 2007
Posts: 865
Likes: 0
From: H-town
cleckner04 is an unknown quantity at this point
Default Re: high rpm shut down

Originally Posted by brandon.beene
do you have VTEC?? the fuel saving version
dont want to be a dick but if you read the entire post you would see that is said y7 and not y5. and it also says dx not hx. fuel saving vtec is vtec-e. but no.
Old Nov 17, 2008 | 12:16 PM
  #9  
jlgrtype's Avatar
Full Access Member
 
Joined: Nov 2003
Posts: 193
Likes: 0
jlgrtype jlgrtype jlgrtype jlgrtype jlgrtype jlgrtype jlgrtype
Default Re: high rpm shut down

mine did the same thing and it was too much fuel doe to large injectors. maybe your injectors are sending too much fuel.
Old Nov 17, 2008 | 12:20 PM
  #10  
cleckner04's Avatar
Thread Starter
fabricating is fun
 
Joined: May 2007
Posts: 865
Likes: 0
From: H-town
cleckner04 is an unknown quantity at this point
Default Re: high rpm shut down

Originally Posted by jlgrtype
mine did the same thing and it was too much fuel doe to large injectors. maybe your injectors are sending too much fuel.
i just updated it and it was the vss. i guess when you get into high rpms the speed sensor was shutting it down because i think it was hitting the speed limiter. i dont know much on that but i unhooked it and it will go the whole time to tach out. i know that the vss plug had a little corrosion on it. thanks though.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
jdmontheway
Parts ARCHIVE
20
Dec 11, 2008 09:12 AM
ntenc1
Tech Talk
6
Aug 27, 2008 04:02 AM
slow95
Tech Talk
8
Apr 17, 2008 09:07 PM
94_CRVtec
Tech Talk
6
Aug 14, 2005 09:43 PM
fizz
Tech Talk
16
Aug 11, 2004 02:40 AM




All times are GMT -8. The time now is 08:11 AM.