vtec problem
03-04-2007, 06:38 PM
#1
Registered User
Thread Starter
Join Date: Aug 2005
Posts: 121
Likes: 0
Received 0 Likes
on
0 Posts
vtec problem
ok boyz I mah homie has a 98 gsr. now everything runs fine except that the vtec goes in and out like it'll go at 5500 stop at 5900 kick back in at 6100 stp at 6700 back in at 7100 ect....we poped the hood and the only thing i could think of was his vtec silinoid was rusted on the ouside pretty bad... if anyone can help pls do.
03-06-2007, 09:53 AM
#4
....im sure.
Join Date: Sep 2003
Location: Chesapeake
Posts: 355
Likes: 0
Received 0 Likes
on
0 Posts
Re: vtec problem
change the oil. make sure you have the proper level of oil in the engine,or vtec will not engage properly. also....remove the vtec solenoid and clean the screen that is inside of it, sometimes it gets clogged up with debris which will in turn restrict the oil flow,therefore your vtec will not engage properly as well.
also check your pcv valve.....
good luck.
also check your pcv valve.....
good luck.
03-06-2007, 10:10 AM
#5
Registered Member
Join Date: Nov 2006
Location: nova
Posts: 2,950
Likes: 0
Received 0 Likes
on
0 Posts
Re: vtec problem
change the oil. make sure you have the proper level of oil in the engine,or vtec will not engage properly. also....remove the vtec solenoid and clean the screen that is inside of it, sometimes it gets clogged up with debris which will in turn restrict the oil flow,therefore your vtec will not engage properly as well.
also check your pcv valve.....
good luck.
also check your pcv valve.....
good luck.
Re: vtec problem
Thread
Thread Starter
Forum
Replies
Last Post