My fan motor for my acura integra isn't working so right now my car is over heating. I just ran the fan to a swich but it didn't go on...The motor is bad. I in turn ran the switch to the Ac fan which was still working. It cools a little better but not all the way. I was wanting to know if I could just take out my whole fan assembley and use a two electric fan s or just go ahead and replace the fan motor. I am going to turbo it in the future.

Only talk if you know what you are talking about.

One.

 

Well, for the most part, you can just go and replace the fan itself with a Spal or hayden cooling fan. Both will cool better than stock usually. Local auto parts stores carry only generic replacements, so if you're looking for something that will fit like the origional you'll need to go to the dealer. But if you want to modify you can go with the spal high CFM + an aluminum radiator. These fans can also be wired up to your OE fan activation circuit if you so please.

 

You dont know if you can swap out fan motors but you are going to turbo you car...HA good luck

 

Thanx for the optimism.