BIG DSM PROBLEM...IF YOU KNOW YOUR ECLIPSE GET IN HERE
Registered Member
Joined: Feb 2003
Posts: 118
Likes: 0
From: Va Beach
Re: BIG DSM PROBLEM...IF YOU KNOW YOUR ECLIPSE GET IN HERE
Originally Posted by EclipZ
the td05 16g will bolt up but youll have to get a J pipe for the lower intercooler pipe. not sure about the oil and coolant lines to the turbo on a 2g though.
No Name Who?
Joined: Nov 2002
Posts: 867
Likes: 0
From: JMU
Re: BIG DSM PROBLEM...IF YOU KNOW YOUR ECLIPSE GET IN HERE
Originally Posted by turbotalon95
A 2g needs the 1g oil return, but can get by with the stock water lines with a little modification. The 1g lines are easier though.
a little drilling and twisting and you are good to go
Registered User
Joined: Sep 2005
Posts: 3
Likes: 0
Re: BIG DSM PROBLEM...IF YOU KNOW YOUR ECLIPSE GET IN HERE
Rings are gone allowing oil to be pushed into the combustion chamber and out the exhaust. if you replace then rehone the walls and get yourself a new head gasket and acl bearings.
❒Good ❒ Better ✔Best
Joined: Nov 2002
Posts: 4,598
Likes: 0
From: Fredericksburg
Re: BIG DSM PROBLEM...IF YOU KNOW YOUR ECLIPSE GET IN HERE
Originally Posted by 4G63GS
Rings are gone allowing oil to be pushed into the combustion chamber and out the exhaust. if you replace then rehone the walls and get yourself a new head gasket and acl bearings.
Thread
Thread Starter
Forum
Replies
Last Post
