yota expert needed
i have a 89 yota pickup lifted 3 inch body 4 inch suspension and 35in tires, would it be possible to move all the suspension to a 4 runner?? and then move all the stock susspension over from the 4 runner to the pickup? possible or no?
Depends on year 4runner. If your 4runner is '86-89 or maybe through '95 it should work...... I think!!! If the 4runner has torsion bars up front and rear leaf springs..... should be the same. Also, check this site:
http://www.pirate4x4.com/forum/forumdisplay.php?f=12
http://www.pirate4x4.com/forum/forumdisplay.php?f=12
Last edited by ottoyota; Nov 12, 2006 at 11:31 AM.
Depends on year 4runner. If your 4runner is '86-89 or maybe through '95 it should work...... I think!!! If the 4runner has torsion bars up front and rear leaf springs..... should be the same. Also, check this site:
http://www.pirate4x4.com/forum/forumdisplay.php?f=12
http://www.pirate4x4.com/forum/forumdisplay.php?f=12
I'm no expert but it is definitely possible with a lot of work. They both have the same stock front and rear ends (7.5" ifs front and 8" solid axle rear) so the switch should not be a problem.
The front suspension is the same on 86-95 4runners.. however 90-95 4runners use rear coils instead of leaf springs.
It really depends on which year 4runner you are referring to.
It really depends on which year 4runner you are referring to.
Thread
Thread Starter
Forum
Replies
Last Post





