Another inspection question
Thread Starter
Registered Member
Joined: Dec 2002
Posts: 488
Likes: 0
From: Va Beach
Another inspection question
Okay so I go to this used lot, and in the corner they have a car I was interested in. There is no price tag on it so I ask if it's for sale, and they say yes, but it's not on the main lot because it's not inspected and won't pass inspection because "its lowered". From what I thought I understood was that height does not matter for the safety inspection. Does anybody KNOW if height will make you fail inspection or have any resources where I can find this answer? Thanks
Banned
Joined: Aug 2006
Posts: 145
Likes: 0
Re: Another inspection question
as far as i know, any alteration to suspension is illegal...i dunnno if that means it will fail inspection or what... really..if you take it to the right place it will pass...thats just my .02
7FIVE7
Joined: Sep 2003
Posts: 643
Likes: 0
From: 757
The Pro to call.
Joined: Jul 2003
Posts: 6,172
Likes: 0
From: under cars.
Re: Another inspection question
a vehicle that is lowered can pass inspection, provided it meets some criteria.
the tires cannot scrub the body. it cannot be lowered where it causes any point of the body, frame, or fuel tank to contact the ground. if the lowering reduces the turning radius, it wont pass. those retarded ground control coil over kits that slip over your factory struts using o rings to take up the slack wont pass, due to the fact they let the spring fall out when lifted up. the ricers, and MaDJDM DRYFT0rZ that like having uber neg. camber are rejectable as fuck also, due to the fact the vehicles tires are visually out of line.
add in line 12, which states that a vehicle can be rejected due to any modification that has been made to any part of the steering or suspension system that affects proper steering or suspension or any part of the original system has been disconnected.
its purely up to the interpretation of the inspection laws by the inspector and trooper. MOST vehicles, when properly lowered, will pass. however, dont expect to have a car that is slammed pass. general rule of thumb is 1-1.5" of drop is the most you can do without causing much suspension issues, and that is legal.
the tires cannot scrub the body. it cannot be lowered where it causes any point of the body, frame, or fuel tank to contact the ground. if the lowering reduces the turning radius, it wont pass. those retarded ground control coil over kits that slip over your factory struts using o rings to take up the slack wont pass, due to the fact they let the spring fall out when lifted up. the ricers, and MaDJDM DRYFT0rZ that like having uber neg. camber are rejectable as fuck also, due to the fact the vehicles tires are visually out of line.
add in line 12, which states that a vehicle can be rejected due to any modification that has been made to any part of the steering or suspension system that affects proper steering or suspension or any part of the original system has been disconnected.
its purely up to the interpretation of the inspection laws by the inspector and trooper. MOST vehicles, when properly lowered, will pass. however, dont expect to have a car that is slammed pass. general rule of thumb is 1-1.5" of drop is the most you can do without causing much suspension issues, and that is legal.
Thread
Thread Starter
Forum
Replies
Last Post
dorydorydriftin
Automotive Discussion
51
Jul 13, 2008 11:49 AM
