will a 6 puck fuk up a tranny....?
05-10-2003, 11:14 AM
#1
jdm
Thread Starter
Join Date: Dec 2002
Location: virginia beach
Posts: 390
Likes: 0
Received 0 Likes
on
0 Posts
will a 6 puck fuk up a tranny....?
ok i got a zc. will a 6 puck sprung hub clutch "rip apart" my tranny adn my axles like some owner of a shop said. by the way dont forget its sprung hub because thats lets you feather it.thanks
05-10-2003, 05:45 PM
#2
It has 4 Doors...
Join Date: Nov 2002
Location: Fredericksburg,Va
Posts: 326
Likes: 0
Received 0 Likes
on
0 Posts
That's a good ?...I've heard that a clutch of that nature might mess up a tranny then again not sure how reliable the source was I heard it from... Guess it's time for some reasearch or I'll keep my eye on this thread for the info for the memory banks...lol 
05-10-2003, 09:59 PM
#4
No Name Who?
Join Date: Nov 2002
Location: JMU
Posts: 867
Likes: 0
Received 0 Likes
on
0 Posts
Definately Not Recommeded.
I've been through 3 trannies on my car since I put in my 6 puck. My brother has broken 2 in his acura with one. Ricky has broken a couple cause of his.
They grab to hard and don't give enough to loose the majority of the shock on the drive train. They also are really harsh on synchros and stuff.
I will never put one in my daily driver or an AWD again. My brother refuses to put one in his integra. He runs high 11's on a street disk and is plenty happy with it.
I've been through 3 trannies on my car since I put in my 6 puck. My brother has broken 2 in his acura with one. Ricky has broken a couple cause of his.
They grab to hard and don't give enough to loose the majority of the shock on the drive train. They also are really harsh on synchros and stuff.
I will never put one in my daily driver or an AWD again. My brother refuses to put one in his integra. He runs high 11's on a street disk and is plenty happy with it.
05-11-2003, 08:19 AM
#7
Registered User
Join Date: Dec 2002
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
ok everyone i;ve installed MANY 6 pucks into a lot of cars. heres the thing....if you get a 6 puck straight up you will probally mess up stuff if you suck at driving. HOWEVER....the 6 puck SPRUNG HUB cluthes enable you to feather the clutch and daily drive liek a charm and you will never have problems. thats the fact.
05-11-2003, 10:12 AM
#8
What FMIC?????
Join Date: Dec 2002
Location: central Va
Posts: 314
Likes: 0
Received 0 Likes
on
0 Posts
Yeah. A sprung hub is alot more forgiving than a solid. You still may have to feather it a good bit but it won't be as harsh.
What kinda pressure plate are you running with it also?
or more specific what clutch are you looking at.
What kinda pressure plate are you running with it also?
or more specific what clutch are you looking at.
05-11-2003, 12:05 PM
#10
UTRASP33D
Join Date: Dec 2002
Posts: 1,676
Likes: 0
Received 0 Likes
on
0 Posts
FUCK a six puck, when i had a ls in my hatch i put a 6 puck... never again, its annoying, it maybe sprung.. but when the disc hit the wheel, it still snaps into gear... you would be fine witha good street disc..but this is
MY OPINION, its all a matter of what you want... as a daily driver i would say stay disc.
MY OPINION, its all a matter of what you want... as a daily driver i would say stay disc.