what all do i need for a b18a swap into a crx
#1
d16z6crx
Thread Starter
Join Date: Feb 2005
Location: norfolk,Va
Posts: 532
Likes: 0
Received 0 Likes
on
0 Posts
what all do i need for a b18a swap into a crx
i want to put a b18a into a 90 crx dx besides the motor, mounts, and cable tranny, ecu and wiring harness what else do i need and what shift linkage do i use for this swap
#2
Boosted F2B
Join Date: Mar 2004
Location: coming back to VA..
Posts: 498
Likes: 0
Received 0 Likes
on
0 Posts
Re: what all do i need for a b18a swap into a crx
Originally Posted by d16z6crx
i want to put a b18a into a 90 crx dx besides the motor, mounts, and cable tranny, ecu and wiring harness what else do i need and what shift linkage do i use for this swap
#4
Registered Member
Join Date: Jan 2004
Location: Las Vegas
Posts: 1,328
Likes: 0
Received 0 Likes
on
0 Posts
Re: what all do i need for a b18a swap into a crx
I just used the D-series linkage but you have to cut and weld it togeather, make sure you bang a dent for the alternator also... hmm what else... make sure you have the rear transmission bracket, I had to order one, your also goign to have the bag the front engine mount bracket to fit the motor... I think thats it. if you havent done the MPFI wiring yet your going to have to do that. If i havent covered it all or theres more or I fucked up somewhere hondatech is a good place to look also
#5
shtty bike repper
Join Date: Dec 2003
Location: va
Posts: 2,279
Likes: 0
Received 0 Likes
on
0 Posts
Re: what all do i need for a b18a swap into a crx
if your using a hasport mount kit you need to change the left side engine bracket to a 90-93 integra. you also need axles.
Thread
Thread Starter
Forum
Replies
Last Post