what all do i need for a b18a swap into a crx
 

i want to put a b18a into a 90 crx dx besides the motor, mounts, and cable tranny, ecu and wiring harness what else do i need and what shift linkage do i use for this swap

Re: what all do i need for a b18a swap into a crx
 

hasport and place racing both make the shift linkage for that swap, there are others but i can't remember right now.

Re: what all do i need for a b18a swap into a crx
 

thanks

Re: what all do i need for a b18a swap into a crx
 

I just used the D-series linkage but you have to cut and weld it togeather, make sure you bang a dent for the alternator also... hmm what else... make sure you have the rear transmission bracket, I had to order one, your also goign to have the bag the front engine mount bracket to fit the motor... I think thats it. if you havent done the MPFI wiring yet your going to have to do that. If i havent covered it all or theres more or I fucked up somewhere hondatech is a good place to look also

Re: what all do i need for a b18a swap into a crx
 

if your using a hasport mount kit you need to change the left side engine bracket to a 90-93 integra. you also need axles.