throwing code 9
#2
Re: throwing code 9
code 9, CYP sensor, copied from H-T:
the CYP is in the distributor. it typically does not go bad, it's probibly a connection problem.
check the plugs at the distributor, at the passenger shock tower and at the ECU.
if all the plugs are good, replace the dizzy
the CYP is in the distributor. it typically does not go bad, it's probibly a connection problem.
check the plugs at the distributor, at the passenger shock tower and at the ECU.
if all the plugs are good, replace the dizzy
#3
registeredbeerdrinkr
Thread Starter
Join Date: Nov 2002
Location: Beaufort, SC
Posts: 172
Likes: 0
Received 0 Likes
on
0 Posts
Re: throwing code 9
yeah I checked everything, Its all good
I even took cap,button,coil off to see if there was a loose wire or sumthin.
The car still runs great,just throwin the damn code
and cant stand the cel.
I even took cap,button,coil off to see if there was a loose wire or sumthin.
The car still runs great,just throwin the damn code
and cant stand the cel.
#4
Re: throwing code 9
that was the general consensus... the car will run fine, but the light's on. meh... the cylinder position sensor is a black box under the cap... if you're really crafty, you may be able to swap just that part out without messing anything up, probably with a 90-91 integra part. but that's pure speculation... i'd just get a new dizzy. distributor king sells them, brand new for under $300.
#6
Re: throwing code 9
honestly i'm not sure what'll happen if you just leave it. and yeah, obd-0 distributors are expensive, and the bearings are prone to failure, so buying a used one (which is still usually $100 or so) is a gamble. there's no USDM equivelant that you can just go to autozone and buy. that's why i suggested maybe the CYP sensor has a USDM equivelant and you could just swap that part out, but you'd be in uncharted waters i think.
#10
cubs 4 life
Join Date: Feb 2004
Location: newport news
Posts: 4,784
Likes: 0
Received 0 Likes
on
0 Posts
Re: throwing code 9
hey geonfreaq how much can i get a d15b vtec dizzy for. also im woindering if i can take my si crx dizzy and put it on the d15b is this possible or no bc its obdo. let me know please
Thread
Thread Starter
Forum
Replies
Last Post