reliable turbo?
05-12-2010, 08:32 PM
#1
Registered member
Thread Starter
Join Date: May 2009
Location: Martinsburg, WV
Posts: 643
Likes: 0
Received 0 Likes
on
0 Posts
reliable turbo?
I have a dseries in an 88 hatch dx its the dual point.
i'm going to convert it to multipoint.
besides that, what should I do to build it up to be reliable with a turbo?
new pistons and rods i assume since d series rods are weak from what I've read.
will I need stronger headstuds?
it's a daily driver so I'm not trying to go past say 8-10lbs at the most.
I'd appreciate any help. thanks.
i'm going to convert it to multipoint.
besides that, what should I do to build it up to be reliable with a turbo?
new pistons and rods i assume since d series rods are weak from what I've read.
will I need stronger headstuds?
it's a daily driver so I'm not trying to go past say 8-10lbs at the most.
I'd appreciate any help. thanks.
05-12-2010, 10:12 PM
#2
.
Join Date: Feb 2003
Location: Colorado Springs
Posts: 8,339
Likes: 0
Received 0 Likes
on
0 Posts
Re: reliable turbo?
z6
tuner toys rods
vitara pistons
valves and valve springs
arp head studs
whatever turbo you want up to ~400whp
id say personally, a 50 trim and run about 20lbs.
good setup there.
tuner toys rods
vitara pistons
valves and valve springs
arp head studs
whatever turbo you want up to ~400whp
id say personally, a 50 trim and run about 20lbs.
good setup there.
Thread
Thread Starter
Forum
Replies
Last Post