Power steering
#1
Turbo? whats that
Thread Starter
Join Date: Oct 2003
Location: SoCal
Posts: 234
Likes: 0
Received 0 Likes
on
0 Posts
Power steering
recently my power steering went out and i cant seem to find out what part isnt working i think its the pump, but im not sure the power steeringg wants to start rsponding after i get the rpm above 2k but belowe that it wont respond at all. any ideas would help
#3
Ivy Tadita
Join Date: Mar 2003
Location: Roanoke, Va
Posts: 2,212
Likes: 0
Received 0 Likes
on
0 Posts
Re: Power steering
Your ps pulley may be locking up or torqued on too hard. When you're over 2k rpms it's probably getting enough power to try and rotate it. I'd check the torque on it to make sure it's not on too tight.
#4
Turbo? whats that
Thread Starter
Join Date: Oct 2003
Location: SoCal
Posts: 234
Likes: 0
Received 0 Likes
on
0 Posts
Re: Power steering
Originally Posted by cootees
Your ps pulley may be locking up or torqued on too hard. When you're over 2k rpms it's probably getting enough power to try and rotate it. I'd check the torque on it to make sure it's not on too tight.
#7
Re: Power steering
I took mine off if you have to get a new one you can buy mine.
But, it does sound like a bad pump. It would squeal like a mofo if it was locked up or the belt was screwed.
But, it does sound like a bad pump. It would squeal like a mofo if it was locked up or the belt was screwed.
Thread
Thread Starter
Forum
Replies
Last Post