My Clutch is Slipping
#1
Registered User
Thread Starter
Join Date: Mar 2003
Location: Fairfax
Posts: 29
Likes: 0
Received 0 Likes
on
0 Posts
My Clutch is Slipping
i just installed a after market clutch but im still using my stock fly wheel....
Its been slipping when im shifting 3rd to 4th
What might the problem be?
Its been slipping when im shifting 3rd to 4th
What might the problem be?
#3
corona connessuer
Join Date: Nov 2002
Location: GUAM
Posts: 3,425
Likes: 0
Received 0 Likes
on
0 Posts
how many miles have you driven the car since you have put the clutch in???? you do know that you are supposed to take it easy on it for the first 500 miles or so to allow it to break in correctly.
if not then you may have a glazed clutch disk on you hands!!
if not then you may have a glazed clutch disk on you hands!!
#4
Registered User
Thread Starter
Join Date: Mar 2003
Location: Fairfax
Posts: 29
Likes: 0
Received 0 Likes
on
0 Posts
my flywheel is a dual mass flywheel ... and u cant resurface them... can the slipping go away permenatley or will i have to fix it?
im driving it soft at the beginning and im graduatly giving more throttle as i get more miles i just made 500 miles
the highest rpm ive gon was 4000-5000
i redline at 6500
im driving it soft at the beginning and im graduatly giving more throttle as i get more miles i just made 500 miles
the highest rpm ive gon was 4000-5000
i redline at 6500
#6
corona connessuer
Join Date: Nov 2002
Location: GUAM
Posts: 3,425
Likes: 0
Received 0 Likes
on
0 Posts
Re: My Clutch is Slipping
Originally posted by ChoiBoy
im still using my stock fly wheel....
my flywheel is a dual mass flywheel ... and u cant resurface them...
im still using my stock fly wheel....
my flywheel is a dual mass flywheel ... and u cant resurface them...
you can resurface a stock flywheel!!
#7
Registered User
Thread Starter
Join Date: Mar 2003
Location: Fairfax
Posts: 29
Likes: 0
Received 0 Likes
on
0 Posts
my flywheel is different from other flywheels... its a dual mass flywheel, built to decrease engine vibration.... the flywheel was springs on it so therefore its not possible to resurface