I haven't checked everything yet with a multimeter, but the damn thing won't turn over. The starter gets everything moving ( I saw the cam gears spinning) but it just won't spark. I checked all my spark plugs, they look okay, and the distributor cap looks fine too. It was driving just a matter of hours before that. Was throwing a code 43 but that was because the O2 sensor got a little disconnected. So I have battery charge, all my lights work, but it just won't ignite. Fuel is going in too. And no its not flooded, I left it over night. Same thing. Will roll, but just won't turn over.

Any suggestions before I purchase a new distributor and starter(Its starting to slip now from all the turn over tries)?

 

sounds like your distributor...

 

sounds like it to me too. Hey, is there a place that can ship a distributor through FPO? Anybody know?

 

Before you shell out your money for a distributor. Pull a plug wire at the spark plug and insert a #2 phillips head screw driver into the plug wire. Hold the metal part of the screw driver about.040 inches from a well grounded metal part of the engine, crank the motor and see if you are getting spark. It may save you some money.

 

ebay, just make sure they dont have NO FPO NO APO at the bottom, ive gotten a few things here at my FPO.