no spark changed coil still no spark crank position sensor isnt connected no gas is going threw the fuel filter help needed its converted to obd1 with lx chipped ecu

 

Check fuses.

 

ill check do you think the crank poisityion sensor would do anything I don't think so

 

Check all the grounds, especially the one on the thermostat housing.

 

If the ecu looks for it then yes. When you converted to obd1 did you use a jumper harness? Obd2a-obd1.

I would check your circuitry for the fuel pump since you said you are getting no fuel. Make sure the wires are good, pump is good, fuses aren't blown, etc.

 

changed the fuel pump grounded everything new dizzy plugs wires obd1 converted still nothing i wants to turn over but it doesnt i have fuel just couldnt see for spark

 

you really need to stop changing things without testing them first. #1. crankshaft has everything to do with spark. #2. Whithout proper ground on your car certain things might not work. #3 check fuses. And if all this doesn't work then start checking the wires with an ohm meter for continuity. Sometimes a wire can get cut or pinched during installation.

 

thats true ill check the wires

 

check the ground on the tranny.

 

its there ill put a new one on