LS Swap CRX Problem
07-21-2010, 05:10 PM
#1
SomeRandomDude
Thread Starter
Join Date: Jul 2009
Posts: 22
Likes: 0
Received 0 Likes
on
0 Posts
LS Swap CRX Problem
Alright so i recently swap a JDM B18B into an 88 CRX and im not getting any spark to the wires i know everything on the motor works cause i just pulled it out of my Integra
its OBD-O it has the PM4 ECU out of the integra but i did have to buy a new engine harness and because its an 88 HF the only thing i could find was a 90 SI harness i matched colors on the wires and i feel like thats the problem has anyone else come across this or now how or what went wrong
its OBD-O it has the PM4 ECU out of the integra but i did have to buy a new engine harness and because its an 88 HF the only thing i could find was a 90 SI harness i matched colors on the wires and i feel like thats the problem has anyone else come across this or now how or what went wrong
07-23-2010, 09:36 PM
#2
Dont guess, diagnose
Join Date: Mar 2005
Location: On the beach.
Posts: 1,470
Likes: 0
Received 0 Likes
on
0 Posts
Re: LS Swap CRX Problem
Are you sure its not a PR4, if so its a OBD1 ECU and you will require a conversion harness to use your ecu. OBD0 to OBD I. You can find them all over ebay. I bought mine from there and it even came with a lifetime warranty for less than most places online. Otherwise I would recommend www.boomslang.us
or...
http://cgi.ebay.com/ebaymotors/OBD-0...Q5fAccessories
or...
http://cgi.ebay.com/ebaymotors/OBD-0...Q5fAccessories
Thread
Thread Starter
Forum
Replies
Last Post