LS Swap CRX Problem
 

Alright so i recently swap a JDM B18B into an 88 CRX and im not getting any spark to the wires i know everything on the motor works cause i just pulled it out of my Integra
its OBD-O it has the PM4 ECU out of the integra but i did have to buy a new engine harness and because its an 88 HF the only thing i could find was a 90 SI harness i matched colors on the wires and i feel like thats the problem has anyone else come across this or now how or what went wrong

Re: LS Swap CRX Problem
 

Are you sure its not a PR4, if so its a OBD1 ECU and you will require a conversion harness to use your ecu. OBD0 to OBD I. You can find them all over ebay. I bought mine from there and it even came with a lifetime warranty for less than most places online. Otherwise I would recommend www.boomslang.us

or...

http://cgi.ebay.com/ebaymotors/OBD-0...Q5fAccessories