accarroll

PLEASE CLOSE THREAD THEY ARE INSTALLED THANKS. If anyone has any info on on how to put rsx seats in an EG hatch please give some advice. getting ready to buy a set,thanks. was wondering if there is different rails that will make them bolt in.

spidsta

did a bit of research a few months ago on this. there are no rails that will switch; it must be custom. I'll see if i can find the links.

egcoupejdm

what u have to do is flip the seat upside down and start pulling the front left hole out and do the same with the rear right this is for the driver side. do the same with the passanger but just do the opposite. or you can go the more easier way but seat moves a bit when you turn.. pull on the two holes that are close to the doors untill u see that they match up. you wont be able to get all 4 bolted down unless you do what was down on honda tech awhile back but its a pain in the ass. hope that helps

accarroll

need more detail if anyone has any.

thermal

Honda-Tech is your friend:

http://www.honda-tech.com/zerothread?id=1938320