GTI 1.8T Mod Questions among others
wub wub wub wub
Joined: Sep 2004
Posts: 19,724
Likes: 0
From: Virginia
Re: GTI 1.8T Mod Questions among others
Why are you putting 20th badges on your car?????
3M adhesive will be fine, but I think you should just leave it badgeless.
If you decide to put a blow-off valve on your car, run an HKS SSQ..
Also, I would do the 3" turboback. Or at least the 3" downpipe to a reducer and a 2.5" catback. 3" is not overkill, regardless of what anyone tells you. You'll have the biggest gain with REVO software if you get the 4-bar and 3" downpipe.
3M adhesive will be fine, but I think you should just leave it badgeless.
If you decide to put a blow-off valve on your car, run an HKS SSQ..
Also, I would do the 3" turboback. Or at least the 3" downpipe to a reducer and a 2.5" catback. 3" is not overkill, regardless of what anyone tells you. You'll have the biggest gain with REVO software if you get the 4-bar and 3" downpipe.
Thread Starter
BENORML
Joined: Apr 2003
Posts: 132
Likes: 0
From: Chesterfield
Re: GTI 1.8T Mod Questions among others
Yea I know I feel like all the Mustangs with fake Cobra bumpers. To tell you the truth, I just like the look of them more. I'm gonna do a 2.5 I guess but only if putting a 3" downpipe on it won't slow the air down that much, all that opening and closing would affect it dont you think? I guess later I might as well lower it but thats a whole another topic.
slow ass vw
Joined: Feb 2003
Posts: 79
Likes: 0
From: va beach
Re: GTI 1.8T Mod Questions among others
Originally Posted by ZeRo_c0oL@work
Tornado red Jetta? Flik wheels? That's your car?
If so, you did my trial last year at the HR Dubs picnic. I heard you stopped doing flashes!?!
If so, you did my trial last year at the HR Dubs picnic. I heard you stopped doing flashes!?!
and i did stop for a little while due to lack of free time, but now i'm back up and running.
emmett18
Joined: Nov 2002
Posts: 363
Likes: 0
From: Alexandria
Re: GTI 1.8T Mod Questions among others
I have the revo sw, and a 3" turbo back exhaust no intake just a drop in filter, and a diverter valve and, i put down, 196.9 hp and 250 tq.
Trust me go Revo Ben in vb can hook you up.
Trust me go Revo Ben in vb can hook you up.
Last edited by 94b18c1; Jul 14, 2005 at 10:05 AM.
Yup, jolly poopbuggy
Joined: Nov 2002
Posts: 15,600
Likes: 0
From: Hampton, VA
Re: GTI 1.8T Mod Questions among others
Originally Posted by chirp the 1-2
For the love of go go with the revo 4 bar with the right n75 valve you could be boosting alot higher than 22 pounds and doing it safely on 93 octane!!!
Originally Posted by chirp the 1-2
AEM CAI or INJEN will get the job done!
TO the original poster: Check out www.eurostyleseast.com for your GHL and other needs. They offer awesome deals quite often such as free shipping and large discounts. I have ordered quite a bit from them and never had any problems.
Also, GHL is the only way to go for an exhuast on a 1.8t IMO. If you want to hear the 3" tb I can arrange something for ya more than likely.
Registered member
Joined: Nov 2002
Posts: 15,296
Likes: 0
From: Newport News
Re: GTI 1.8T Mod Questions among others
Originally Posted by 94b18c1
I have the revo sw, and a 3" turbo back exhaust no intake just a drop in filter, and a diverter valve and, i put down, 196.9 hp and 250 tq.
Trust me go Revo Ben in vb can hook you up.
Trust me go Revo Ben in vb can hook you up.
Damn...i see i have to start ordering more parts to catch back up.
