EVO RWD conversion
Thread Starter
Registered Member
Joined: May 2007
Posts: 453
Likes: 0
Re: EVO RWD conversion
Hmm, once again, perfectly curious and genuine post ruined by some douche bags that have computers. Thanks Fabrik8 and The Mark W. what do you mean we...Your at a shop?
Racetracks
Joined: Nov 2002
Posts: 15,668
Likes: 0
From: How long is a piece of string?
Re: EVO RWD conversion
I've always wanted to stuff a ZF transaxle in the trunk of something, Corvette style, but not in anything remotely close to an EVO or other sedan.
Friendly Jackboot
Joined: Oct 2005
Posts: 4,282
Likes: 0
From: NoVA
Re: EVO RWD conversion
yeah no shit...mark w and the rest of the little joes auto people are the only people that i've actually seen do it. the actual true rwd one is a fucking beast. air jacks ftmfw. talk to them.
Big Dick Playa
Joined: Dec 2003
Posts: 3,290
Likes: 0
From: chesapeake
Re: EVO RWD conversion
clearance on the fire wall side was minimul yes we had to cut and modify some of it. mainly in the center where we made the tunnel.
we utilized the factory cross member which was heavily modified the rack itsself sits about 3inches lower and is pushed back about 1/2" and solid mounted. we made custom tie rods with heim joint ends. and also modified the knuckle for alot more angle. (heim joints allowed us to make the rack/tie rods sit flat again)
if ya want i can give a run down on every inch of the car. also if you want pics i have alot.
matter of fact i think its time for a build thread.
Dont guess, diagnose
Joined: Mar 2005
Posts: 1,470
Likes: 0
From: On the beach.
Re: EVO RWD conversion
Rys Millen Racing (Yes, Rys Millen the famed WRC driver turned drifter) put out a RWD kit for the EVO.
Last I checked it was simpily a plug kit for the front CV joints.
Last I checked it was simpily a plug kit for the front CV joints.
Registered Member
Joined: Sep 2006
Posts: 244
Likes: 0
Re: EVO RWD conversion
https://www.vadriven.com/forums/eye-candy-20/official-rwd-evo-build-thread-243352/
kinda funny this popped up.
kinda funny this popped up.
Big Dick Playa
Joined: Dec 2003
Posts: 3,290
Likes: 0
From: chesapeake
Re: EVO RWD conversion
the longitudal one. is running the evo motor, with a modified buschar 1g 4g63 adapter plate mated to a magnesium gm bellhousing and a jerico 4speed transmission.
clearance on the fire wall side was minimul yes we had to cut and modify some of it. mainly in the center where we made the tunnel.
we utilized the factory cross member which was heavily modified the rack itsself sits about 3inches lower and is pushed back about 1/2" and solid mounted. we made custom tie rods with heim joint ends. and also modified the knuckle for alot more angle. (heim joints allowed us to make the rack/tie rods sit flat again)
if ya want i can give a run down on every inch of the car. also if you want pics i have alot.
matter of fact i think its time for a build thread.
clearance on the fire wall side was minimul yes we had to cut and modify some of it. mainly in the center where we made the tunnel.
we utilized the factory cross member which was heavily modified the rack itsself sits about 3inches lower and is pushed back about 1/2" and solid mounted. we made custom tie rods with heim joint ends. and also modified the knuckle for alot more angle. (heim joints allowed us to make the rack/tie rods sit flat again)
if ya want i can give a run down on every inch of the car. also if you want pics i have alot.
matter of fact i think its time for a build thread.
Big Dick Playa
Joined: Dec 2003
Posts: 3,290
Likes: 0
From: chesapeake