B16 Vtec solinoid wires?
hybrid no more :(
Joined: Apr 2003
Posts: 241
Likes: 0
From: Virginia Beach
Re: B16 Vtec solinoid wires?
the vtec solenoid uses the head as the ground... you shouldn't have to wire in a ground... just like the starter. The starter has 2 wires going to it, one is direct battery, the 2nd is the starter signal. The ground of the starter is the actually the casing of the starter and the tranny. Just make sure you're engine is grounded and you're set.
Go Team Marlboro
Joined: Jul 2003
Posts: 2,419
Likes: 0
From: Roanoke, VA
Re: B16 Vtec solinoid wires?
Originally Posted by Bert
the vtec solenoid uses the head as the ground... you shouldn't have to wire in a ground... just like the starter. The starter has 2 wires going to it, one is direct battery, the 2nd is the starter signal. The ground of the starter is the actually the casing of the starter and the tranny. Just make sure you're engine is grounded and you're set.
this is correct. The VTEC pressure swithc however has two wires, just ground the black one with the rest of the grounds on the thermostat housing.
Thread
Thread Starter
Forum
Replies
Last Post
Vern
Want to Buy / Trade ARCHIVE
5
Apr 2, 2008 05:34 PM
