B16 Cam Seal - need response asap.
02-16-2005, 12:43 PM
#1
Registered Member
Thread Starter
Join Date: Jan 2003
Posts: 3,113
Likes: 0
Received 0 Likes
on
0 Posts
B16 Cam Seal - need response asap.
Im like, 60% done and Tuners edge gave me some different advice than what I am encountering.
I took the valve cover and VTEC Solenoid off to replace the cam seal. I took to two 10mm bolts on top of the cam seal area and Gene said there would be two more bolts to take off.
Well it looks like id have to take off all the bolts for the metal rod type deal on top of the cam (sorry, i've never had an OHC motor).
Where do I go? Do these bolts for this piece above the cam require torque setting?
I took the valve cover and VTEC Solenoid off to replace the cam seal. I took to two 10mm bolts on top of the cam seal area and Gene said there would be two more bolts to take off.
Well it looks like id have to take off all the bolts for the metal rod type deal on top of the cam (sorry, i've never had an OHC motor).
Where do I go? Do these bolts for this piece above the cam require torque setting?
02-16-2005, 07:34 PM
#5
Re: B16 Cam Seal - need response asap.
Originally Posted by Black Z-24
I finished it. Lock thread please.
Thanks anyways.
Thanks anyways.
Thread
Thread Starter
Forum
Replies
Last Post