Notices
Tech Talk Anything technically related to your vehicle should be posted here. If you're looking to have work done, try one of the Regional Forums.

1g dsm starting problems

Thread Tools
 
Old Dec 16, 2005 | 12:36 AM
  #1  
AquaDrake's Avatar
Thread Starter
Registered User
 
Joined: Jul 2005
Posts: 2
Likes: 0
AquaDrake has disabled reputation
Default 1g dsm starting problems

edit - posted nothing >_>

ok, when i start my car up on a cold day, it takes 8-20 tries to start up depending on how cold it is. every time i start it up, it makes all the noises like its gonna start up in 1 shot but it never does and when its about to turn over, it quickly does and stalls out again. once it is started, it idles at 5-600 rpms for a good 5 minutes driving or not. also, if i go over 4-5k rpms and quickly put in the clutch, my tach will drop to zero and i'll stall out. just wanted an opinion on this before i drive shop to shop.

Last edited by AquaDrake; Dec 16, 2005 at 12:44 AM.
Old Dec 16, 2005 | 02:09 PM
  #2  
12ipone's Avatar
Registered Member
 
Joined: Jul 2004
Posts: 18
Likes: 0
From: va beach
12ipone has disabled reputation
Default Re: 1g dsm starting problems

Mine use to do that so I turned up the idle to a 1000 haha. It's ghetto but it's ok.. but I think it might be your ISC.

Last edited by 12ipone; Dec 16, 2005 at 02:12 PM.
Old Dec 16, 2005 | 09:10 PM
  #3  
Slo DSM's Avatar
Registered Member
 
Joined: Apr 2004
Posts: 61
Likes: 0
From: Va. Beach
Slo DSM is an unknown quantity at this point
Default Re: 1g dsm starting problems

It could be the ISC, but there are so many other things that could cause this. Typically if your isc is failing, you will get 'idle surge' and the car will raise and drop rpms. You didn't say anything to indicate this, so I would start looking elsewhere.

Start simple and then work your way to the bigger stuff.. Vacuum leaks, missing/damaged vacuum lines, Incorrect idle setting.. Incorrect fuel pressure (i.e, failing pump, clogged injectors, bad FPR), failing/incorrectly adjusted TPS, the list goes on and on..
If you have the FSM, then start pouring over the troubleshooting paragraphs, 11-5, 14-7 & 25-3. If you don't, then get one.
Old Dec 20, 2005 | 06:12 PM
  #4  
1gawd's Avatar
I DONT SPIN
 
Joined: Dec 2005
Posts: 212
Likes: 0
From: gloucester
1gawd has disabled reputation
Default Re: 1g dsm starting problems

sounds fuel related, start with a volume test. disconnect fuel line and crank engine for 10 seconds. I think it sould fill a 16oz bottle in 10 sec. (any mitsu techs feel free to correct me if i'm wrong) That will at least tell you if it is a fuel delivery problem or not (common among 1g's). good luck
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
slewis79
Tech Talk
2
Apr 22, 2008 09:10 PM
M1KeyC
Tech Talk
1
Nov 3, 2007 01:07 AM
RtryPwr
Tech Talk
3
Jan 2, 2007 06:57 AM
Ej8D16y8-T
Tech Talk
0
Dec 6, 2005 01:02 PM
beanslimm
Tech Talk
2
Oct 28, 2005 12:48 PM




All times are GMT -8. The time now is 08:38 AM.