KA-T Pasrts: GTiR T28 Turbo, R.S. Enthalpy ECU, 1/2 NPT Tapped Pan
01-17-2012, 01:37 PM
#1
YANKYMATE!
Thread Starter
KA-T Pasrts: GTiR T28 Turbo, R.S. Enthalpy ECU, 1/2 NPT Tapped Pan
Name: Trace
Location: Newport News, VA
Means of Contact: PM, this thread
Alright guys, I've recently had a change of priorities involving my KA S13, so I'm selling off the KA-T parts I was in the process of collecting. I'll try to provide as much information as possible and be up-front and honest about everything, but if you have any questions, please feel free to shoot them my way.
GTiR Garret T28 Turbo - After doing plenty of research, I opted to go with the GTiR for my setup. There's only the smallest amount of shaft play and it's barely distinguishable. Everything spins and moves freely and the best part is that I bought it from a close friend who upgraded his KA-T, so I know for a fact that it performs perfectly and will easily push a KA into the 350HP range. Doesn't need a rebuild, I was planning on installing it as is into my build. Asking $400 picked up, will ship at buyer's expense.
R.S. Enthalpy ECU - SOLD SOLD SOLD - Personally had it re-flashed for a KA24DE with stock internals and head gasket, 370CC injectors, N60 MAF, and a T25/T28 turbo setup. I was planning on achieving anywhere from 250 to 300HP. Never been installed since the tune, so it's pretty much brand new. Asking $300 picked up, will ship at buyer's expense.
1/2 NPT Tapped KA24DE Oil Pan - SOLD SOLD SOLD - Bought this from a member on Zilvia recently. Oil pan is in near perfect condition with only a couple minor scratches along the front bottom. The lip is undamaged, there are no dents in the pan, and the welding was done by a professional. Asking $30 picked up, will ship at buyer's expense.
Like I said, feel free to ask me any questions you might have and I'd be happy to answer them to the best of my abilities. Payment can be made through PayPal and I can guarantee the part will be in the shipping company's hands within 24 hours of receiving payment.
My loss is your gain!
Location: Newport News, VA
Means of Contact: PM, this thread
Alright guys, I've recently had a change of priorities involving my KA S13, so I'm selling off the KA-T parts I was in the process of collecting. I'll try to provide as much information as possible and be up-front and honest about everything, but if you have any questions, please feel free to shoot them my way.
GTiR Garret T28 Turbo - After doing plenty of research, I opted to go with the GTiR for my setup. There's only the smallest amount of shaft play and it's barely distinguishable. Everything spins and moves freely and the best part is that I bought it from a close friend who upgraded his KA-T, so I know for a fact that it performs perfectly and will easily push a KA into the 350HP range. Doesn't need a rebuild, I was planning on installing it as is into my build. Asking $400 picked up, will ship at buyer's expense.
R.S. Enthalpy ECU - SOLD SOLD SOLD - Personally had it re-flashed for a KA24DE with stock internals and head gasket, 370CC injectors, N60 MAF, and a T25/T28 turbo setup. I was planning on achieving anywhere from 250 to 300HP. Never been installed since the tune, so it's pretty much brand new. Asking $300 picked up, will ship at buyer's expense.
1/2 NPT Tapped KA24DE Oil Pan - SOLD SOLD SOLD - Bought this from a member on Zilvia recently. Oil pan is in near perfect condition with only a couple minor scratches along the front bottom. The lip is undamaged, there are no dents in the pan, and the welding was done by a professional. Asking $30 picked up, will ship at buyer's expense.
Like I said, feel free to ask me any questions you might have and I'd be happy to answer them to the best of my abilities. Payment can be made through PayPal and I can guarantee the part will be in the shipping company's hands within 24 hours of receiving payment.
My loss is your gain!
Last edited by lbs_ft; 02-02-2012 at 07:48 PM.
Re: KA-T Pasrts: GTiR T28 Turbo, R.S. Enthalpy ECU, 1/2 NPT Tapped Pan
Thread
Thread Starter
Forum
Replies
Last Post
