Hey Chris or Terry...
Patron
Joined: Aug 2004
Posts: 7,803
Likes: 0
From: Virginia Unfortunately
Re: Hey Chris or Terry...
Originally Posted by Brian T
...remind me what I have to do again. I forgot most of it. Well mainly the parts to do with the E-Manage. 
I will need for the emanage
the original un-altered maps emailed to boostmx5@aol.com
Rotary and switch settings for the emanage spyder motor (important!)
I think Chris needed you to get new plugs
the pin outs of the ecu
Installation instructions of the emnage on the spider
Chris should chime in on what else he needs
Registered Member
Joined: May 2004
Posts: 5,830
Likes: 0
From: RICHMOND, VA
Re: Hey Chris or Terry...
Originally Posted by chapter8
hhaha that was alot to remember
I will need for the emanage
the original un-altered maps emailed to boostmx5@aol.com
Rotary and switch settings for the emanage spyder motor (important!)
I think Chris needed you to get new plugs
the pin outs of the ecu
Installation instructions of the emnage on the spider
Chris should chime in on what else he needs
I will need for the emanage
the original un-altered maps emailed to boostmx5@aol.com
Rotary and switch settings for the emanage spyder motor (important!)
I think Chris needed you to get new plugs
the pin outs of the ecu
Installation instructions of the emnage on the spider
Chris should chime in on what else he needs
ECU Pinout
Plugs
Install instructions for e-manage
Extra MAF if you can get your hands on it
Cross your fingers
Thread
Thread Starter
Forum
Replies
Last Post