V6 swap in EK chassis done! (J32 swap)
Thread Starter
Classified Moderator
Joined: Nov 2002
Posts: 7,274
Likes: 0
From: Hampton,VA
NA No V-tec D
Joined: Nov 2002
Posts: 378
Likes: 0
From: d-series>k-series
Re: V-6 Motor Swap Done!!
thanks to everyone for the support saturday night!! the main goal of this was to be a lil different in the Honda world. The best part is the mounts are made to be bolted in, and if you wanted to go back to stock........ (god forbid that!! 
) you could.
Drive shaft questions:
We worked with Drive Shaft Shop with our specs on the axles and this is the first pair made with same hub to differential dimension for both passenger and driver side. this should eliminate most if not all of the torque steer.
ECU/wiring questions:
its a ancient Chinese secret.... there wasent that much wiring... we used the factory TL-S ecu, management is in the works for future plans 
How it drives:
It drives like a v6 in a civic?? The front end doesent feel heavy at all, actually it feels better than my old h22 ek. Understeer is very minimal.
Practicality? UMMMM it has power steering and A/C(soon) and seating for 5 plus a trunk area....not practical for autocross due to a weight transfer but then again we gotta take it to the track to find out?
yes i know i made a mess inside the car but then again you guys should see the mess i made in the garage!
yes i know about the headers, but comptech is no longer a manufacture of the aftermarket
) you could. Drive shaft questions:
We worked with Drive Shaft Shop with our specs on the axles and this is the first pair made with same hub to differential dimension for both passenger and driver side. this should eliminate most if not all of the torque steer.
ECU/wiring questions:
its a ancient Chinese secret....
there wasent that much wiring... we used the factory TL-S ecu, management is in the works for future plans How it drives:
It drives like a v6 in a civic?? The front end doesent feel heavy at all, actually it feels better than my old h22 ek. Understeer is very minimal.
Practicality? UMMMM it has power steering and A/C(soon) and seating for 5 plus a trunk area....not practical for autocross due to a weight transfer but then again we gotta take it to the track to find out?
yes i know i made a mess inside the car but then again you guys should see the mess i made in the garage!
yes i know about the headers, but comptech is no longer a manufacture of the aftermarket
NA No V-tec D
Joined: Nov 2002
Posts: 378
Likes: 0
From: d-series>k-series
Re: V-6 Motor Swap Done!!
This is the module/Piggy back im running with the ecu.
http://img.photobucket.com/albums/v2...jdm/Module.jpg
[http://img.photobucket.com/albums/v2...dm/Module2.jpg
Custom made By RichieV6 from Chicago.
http://img.photobucket.com/albums/v2...jdm/Module.jpg
[http://img.photobucket.com/albums/v2...dm/Module2.jpg
Custom made By RichieV6 from Chicago.
