well you cant register, the event is filled up, Im just goin to see if I can get in (no shows)
Most likely there will be a few no shows.....glad to see you will be out there

 

Damn it, it's full already?! I guess I'll have to do the same. Got new pads installed so I should be ready for it.

 

cool what ya get the same ones I have or the project mu?

 

Got the same ones you have just never got around to install them. Finally did it this past weekend. Glad I did the old pads were very very worn. They have been fairly quiet so far. I'm taking easy on them for the first 700 miles.

 

cool, my pads are noisey as a sonamabitch....but I like them that way

 

Yeah, I know. I put lots of high temperature brake grease when I installed them so I'm hoping it would stay quiet.

 

sweet...your sig is awesome btw

 

Haha, yes, they are the masters for sure.

 

I love Panizzi but they are awesome

 

What kind of pads are you guys running?

Pads above mu coefficient 0.45 are almost impossible to make "quiet". On the Evolution particularly, the Carbotech Bobcat compound made a lot of noise because it was capable of generating a substantial amount of friction at low brake line pressure. Basically the pad would start resonating because it wasn't being pushed on hard enough to dampen the vibrations. The high-temp anti-squeal goop is worth a shot. In addition, make sure the slide pins between the pad and caliper bracket are clean (q-tips+brake cleaner do a good job) and regrease them. If the noise is still driving you up the wall, use a hand file and chamfer the leading edge of the pad. That also helps quell noise.