xeno

Hey i was wondering if i could use 1990 integra ls injectors in my OBD0 b16a? since they are both OBD0 peak an hold right??

cleckner04

they are the same. if they are peak and hold. they are two types of injectors. if they are different from what you are using then you would want to take the resitor box out of the donor car. i think all the b series injectors are the same till you get the itr or ctrs. i think they all are 240cc but im not sure.

B-Well

Stock is 270cc.

is there a reason you need these injectors?

cleckner04

i still think they are 240cc

im not a 100% positive but i think the LS injectors are saturated and yours is peak and hold. so if you want to change this out just get the resistor box and splice it into yours. if you just install the injectors you will fry your ecu. if im wrong someone correct me.

inboost

the injectors are the same they both are obd-0 and both require a resistor box which your car "should have" if its a factory OBD-0 MPFI vehicle or been converted either way the answer to your question is yes you can use them and yes they will work

sohc_mshue

They are 240cc. As long as they are both peak and hold you will be fine.

B-Well

read up and yes, 240cc as others have said