jdmsihatch

ok i just got sum drag dr-20 15x7 +10mm offset on my civic and im not really liking the way they sit. they stick out on the sides and rub like a b'''h and i dont like that. my question is how can i fix the rub? and what is the offset stuff? what does it mean exactly?

Spindrift

https://www.rsracing.com/tech-wheel.html

10 seconds on google search. how to make em fit should take you another 15 seconds.

jdmsihatch

ok that kinda helpd... so i should have got a more offset wheel like a 38 or 40 offset is pretty much what thats saying

Razmus

yup. if you want to make them fit, get more negative camber, roll the fenders and call it a day, oh and lower the car more

Spindrift

to make them fit without work yes.

Uzi Crooklyn

the higher the offset the more "IN" the wheel is, the lower the more it pokes. you can always stretch the tires a little bit and that will give you clearance

jdmsihatch

ok yea i didnt know what the whole offset deal was when i ordered them so im prob guna just order some with +40mm offset so i can lower my car back down to where i had it with the hammers. its too high with these bc i had to raise the coilovers to clear. it had plenty off neg camber with my hammers