Which Turbo???
08-28-2003, 07:39 AM
#1
E for Engourged.
Thread Starter
Join Date: Nov 2002
Location: oDU.
Posts: 3,512
Likes: 0
Received 0 Likes
on
0 Posts
Which Turbo???
ok SO. time to pick out which turbo i want to purchase, and quite frankly i have no idea where to begin...ill start with a list of what i have and what i will be getting to support the kit
Internally:
SRP 9.0:1 Forged Pistons
Eagle H-beam rods
Benson Sleeved blocked
When i first get the kit on (im piecing one together) i will only run about 5psi everywhere, because i wont have the components to support more boost.
Eventually i will get a Fuel rail & regulator, DSm 450cc injectors, MSD ignition, new clutch (flywheel in long run), upgraded fuel pump, turbo cam.
Temporarily i will be using a V-AFC for all my fuel timing but as soon asi have the funding i'll be upgrading to hondata.
All turbo kit pieces will be of the quality and strength to hold what i'm planning to run, so dont have them limit anything.
I prefer overall power quicker than spool time..but then again i have a 6800 redline so i cant wait too long...with all these factors takin into consideration i really dont know where to begin when picking out the turbo, hopefully you all can help...
Thank you.
-Tommy.
Internally:
SRP 9.0:1 Forged Pistons
Eagle H-beam rods
Benson Sleeved blocked
When i first get the kit on (im piecing one together) i will only run about 5psi everywhere, because i wont have the components to support more boost.
Eventually i will get a Fuel rail & regulator, DSm 450cc injectors, MSD ignition, new clutch (flywheel in long run), upgraded fuel pump, turbo cam.
Temporarily i will be using a V-AFC for all my fuel timing but as soon asi have the funding i'll be upgrading to hondata.
All turbo kit pieces will be of the quality and strength to hold what i'm planning to run, so dont have them limit anything.
I prefer overall power quicker than spool time..but then again i have a 6800 redline so i cant wait too long...with all these factors takin into consideration i really dont know where to begin when picking out the turbo, hopefully you all can help...
Thank you.
-Tommy.
08-28-2003, 08:55 AM
#8
VR-4ever
Join Date: Jul 2003
Location: not in russia.
Posts: 11,708
Likes: 0
Received 0 Likes
on
0 Posts
Turbonetics Thumper T-105!
105mm inducer; 7/16" quill; flow capacity capable of supporting up to 2,000 hp!
...and don't worry about overboosting, you'll never spool it up! lol.
T-105
105mm inducer; 7/16" quill; flow capacity capable of supporting up to 2,000 hp!
...and don't worry about overboosting, you'll never spool it up! lol.
T-105
08-28-2003, 08:59 AM
#9
Registered Member
Join Date: Nov 2002
Posts: 3,690
Likes: 0
Received 0 Likes
on
0 Posts
www.precisionte.com
new website is about to go up so its not too imformative.
know what HP level you want. from that they will tell you waht turbo to get.
new website is about to go up so its not too imformative.
know what HP level you want. from that they will tell you waht turbo to get.
