Whats up guys, i was just seeing what methods you use for getting a timing belt on correct. I've tried using the tensioner that is on the block but that little bastard is to tight, i cant budge it. What are some other ways?
thanks

o by the way its a gsr block

 

take it to a shop to do it right , jk

 

loosen the tensioner.









weak bitch

 

lol,i feel like i'm going to rip the bolt off, i'm using a 1in. drive

 

Naw you have to loosen the tensioner. Spray some pb blaster no the nut and behind the tensioner if need be. But please replace the tensioner with a brand new one.

 

Yes. Tensioners are fairly cheap, so if you have the slightest problem making it work like it's supposed to then replace it.