i just traded my car for a 93 ex coupe and it has some problem the timing belt is tight on one side but loose on another

 

Timing belts stretch with age...or it was not installed correctly.

Just buy a new one and install it.

 

sometimes its a little tighter in the front than in the back

 

i hope thats just it i have another car but this is my dream car and i just wanna get it running right for now

 

+1,

 

Well the tensioner could be bad, or its not the right belt.. the bel should be tight on the left side were its comes straight down from the cam to the crank pulley, the other side is where the tensioner is.. after turning the crank counter clockwise the belt should be tight on both sides. make sure its not to tight or itll make a very high pitched type noise and can break..

 

thats just it i have no idea how to fix this or go about fixing it

 

do u know how to change a timing belt, you gotta know that first

 

take it to a shop or have someone do it. if you do it wrong you will blow the motor. for replacement motor let me know...

 

your dreams must fuckin suck