got a question about gsr rods, i am going to build a high compression all motor gsr with b16 head...should i replace the stock rods with like some egale H beams or dose it really make a difference on account of me not running boost

 

the best thing for the money would be to just get ARP rod bolts if you are planning on revving it only to like 9k or so. If you plan on really getting up there and going beyond 9k then you would want to upgrade the rods because the stockers probably aren't going to be able to handle that kind of a load.

 

a heavier oil might be a good idea too...

 

i have a set of egale H beams in my b20 block will those fit in a gsr block

 

not unless you swapped the crank as well i believe.

 

so that brings me to the next question, will the b20 crank fit in the gsr block.

 

i actually believe it will because i always hear about people putting gsr cranks in their ls blocks to help out their R/S.

 

ya but can u put a b20 crank in a gsr block

 

os your not going LS ne more....i gues syou couldnt find one huh? o well at least you got plans for it...what car is thins goign in i forgot...


good luck tho man

 

Yes, the b20 crank will fit into the b18c block with slight modification to the oil squirters.