question for GSR gurus
 

got a question about gsr rods, i am going to build a high compression all motor gsr with b16 head...should i replace the stock rods with like some egale H beams or dose it really make a difference on account of me not running boost

Re: question for GSR gurus
 

the best thing for the money would be to just get ARP rod bolts if you are planning on revving it only to like 9k or so. If you plan on really getting up there and going beyond 9k then you would want to upgrade the rods because the stockers probably aren't going to be able to handle that kind of a load.

Re: question for GSR gurus
 

a heavier oil might be a good idea too...

Re: question for GSR gurus
 

i have a set of egale H beams in my b20 block will those fit in a gsr block

Re: question for GSR gurus
 

not unless you swapped the crank as well i believe.

Re: question for GSR gurus
 

so that brings me to the next question, will the b20 crank fit in the gsr block.

Re: question for GSR gurus
 

i actually believe it will because i always hear about people putting gsr cranks in their ls blocks to help out their R/S.

Re: question for GSR gurus
 

ya but can u put a b20 crank in a gsr block

Re: question for GSR gurus
 

os your not going LS ne more....i gues syou couldnt find one huh? o well at least you got plans for it...what car is thins goign in i forgot...


good luck tho man

Re: question for GSR gurus
 

Yes, the b20 crank will fit into the b18c block with slight modification to the oil squirters.