Question about hooking up my Vtec
#1
Registered Member
Thread Starter
Join Date: Sep 2005
Location: Hampton
Posts: 298
Likes: 0
Received 0 Likes
on
0 Posts
Question about hooking up my Vtec
I have a 94 Honda accord with a 97 Accord vtec motor in it and I am trying to hook up the vtec. I have the computer from the 97 but dont have the harness with the three plugs on it. I am trying to find out which pin on the computer is the vtec so I can run a wire from the motor to the computer. If you can help send me a private message. Thanks
#4
13.5:1 Poor Mans R
Join Date: Jul 2005
Location: :)
Posts: 2,914
Likes: 0
Received 0 Likes
on
0 Posts
Re: Question about hooking up my Vtec
I think u have an OBD1 car with an OBD2 motor.
If this is the case..
http://www.boomslang.us/obd1to2.htm
If this is the case..
http://www.boomslang.us/obd1to2.htm
#6
Registered Member
Thread Starter
Join Date: Sep 2005
Location: Hampton
Posts: 298
Likes: 0
Received 0 Likes
on
0 Posts
Re: Question about hooking up my Vtec
ok the computer i have has aa5. I guess that is right and the motor say A5 I think. All i know is my car did not have a vtec in it at all and I put one in it and got the ecu for the vtec but I need to know which wire I am missing in my harness so I can run it from the vtec to the ecu... I hope somebody can help
#7
13.5:1 Poor Mans R
Join Date: Jul 2005
Location: :)
Posts: 2,914
Likes: 0
Received 0 Likes
on
0 Posts
Re: Question about hooking up my Vtec
ok the computer i have has aa5. I guess that is right and the motor say A5 I think. All i know is my car did not have a vtec in it at all and I put one in it and got the ecu for the vtec but I need to know which wire I am missing in my harness so I can run it from the vtec to the ecu... I hope somebody can help
http://www.honda-tech.com/zerothread?id=1004852
Thread
Thread Starter
Forum
Replies
Last Post