powersteering problem
#3
Registered Member
Join Date: Jan 2003
Location: Yorktown
Posts: 248
Likes: 0
Received 0 Likes
on
0 Posts
Re: powersteering problem
Whats the problem your having? I replaced my hardline and never bled the system and it works like a champ. Just toped it off and went from there.
#4
Re: powersteering problem
okay what happened was i bent the control arm on my 240 and the front crossmember and tie rod so yea i changed my cross member the control arm and the tie rod and i started my car turned the wheel and the fluid started spitting out of the reservoir and then i drove it when i came back i saw alot of the fluid in my drive so yea not really sure wahts wrong
#5
Registered Member
Join Date: Jan 2003
Location: Yorktown
Posts: 248
Likes: 0
Received 0 Likes
on
0 Posts
Re: powersteering problem
Does your resevoir have a puncture wound? The power steering hardlines on these cars are commonly known to spring leaks but you may need to replace your resevoir if thats whats bleedin everywhere.
#7
Needs more poke.
Join Date: Feb 2004
Location: Brunswick, ME
Posts: 6,413
Likes: 0
Received 0 Likes
on
0 Posts
#8
Re: powersteering problem
well i think its coz i have a hole in my return hose which i think means i have to change it then bleed it coz when i started my car i saw it grippin from there and then the powersteering pump was smoking so yea what do you guys thinks?
Thread
Thread Starter
Forum
Replies
Last Post