obd1 ecu codes please help
04-15-2004, 07:04 PM
#1
Registered User
Thread Starter
Join Date: Mar 2004
Posts: 43
Likes: 0
Received 0 Likes
on
0 Posts
obd1 ecu codes please help
I would pull up honda-tech but no access due to internet filters. Well here it goes I put the jumper wire in and I get a code 9.
Then when I clear the back up fuse, and turn the car to ignition(jumper wire is still on) the SRS light will blink and stays on solid, check engine light stays on just after.
thanks for your help.
Then when I clear the back up fuse, and turn the car to ignition(jumper wire is still on) the SRS light will blink and stays on solid, check engine light stays on just after.
thanks for your help.
04-16-2004, 03:36 AM
#2
corona connessuer
Join Date: Nov 2002
Location: GUAM
Posts: 3,425
Likes: 0
Received 0 Likes
on
0 Posts
Re: obd1 ecu codes please help
Originally Posted by Devine_wind
I would pull up honda-tech but no access due to internet filters. Well here it goes I put the jumper wire in and I get a code 9.
Then when I clear the back up fuse, and turn the car to ignition(jumper wire is still on) the SRS light will blink and stays on solid, check engine light stays on just after.
thanks for your help.
Then when I clear the back up fuse, and turn the car to ignition(jumper wire is still on) the SRS light will blink and stays on solid, check engine light stays on just after.
thanks for your help.
Thread
Thread Starter
Forum
Replies
Last Post
Tim-Tim
Want to Buy / Trade ARCHIVE
14
01-16-2008 07:16 PM