Obd0 to obd1
#1
Registered member
Thread Starter
Join Date: Jul 2009
Location: portsmouth
Posts: 877
Likes: 0
Received 0 Likes
on
0 Posts
Obd0 to obd1
Ok so I put a b20 in my 90 crx si. Its in it will get spark the first crank after that goes blank tried several coil packs ecus. Idk wat else to do. Any help or ideas greatly appreciated. Hit me up 757 214 7592
#2
Registered Member
Join Date: Feb 2010
Location: Meditation
Posts: 2,688
Likes: 0
Received 0 Likes
on
0 Posts
Re: Obd0 to obd1
Assuming you've wired everything correctly, a PR4 ecu could work, but it wouldn't run perfectly. An obd1 P75 chipped for the B20 is your best bet.
It really sounds like something isn't hooked up right. The injectors are probably stuck too. Make sure the firing order is correct and plugs are clean.
It really sounds like something isn't hooked up right. The injectors are probably stuck too. Make sure the firing order is correct and plugs are clean.
#4
Registered Member
Join Date: Feb 2010
Location: Meditation
Posts: 2,688
Likes: 0
Received 0 Likes
on
0 Posts
Re: Obd0 to obd1
I gota Ebay one for about 30 dallors for a swap I did and it still works weeks later. This one also has a warrenty.
Thread
Thread Starter
Forum
Replies
Last Post