obd0 or obd1
#1
Registered Member
Thread Starter
Join Date: Mar 2007
Posts: 309
Likes: 0
Received 0 Likes
on
0 Posts
obd0 or obd1
i have a 93 DA i am planning on putting ls/vtec into the car the ls/vtec motor has an obd0 b16 head with a 91 bottm end i am wondering which intake manifold will it require a friend said that a obd1 intake manifold would work because the car is a 93 but just want to know before before i end up getting the wrong intake manifold. i am also wondering if the stock oil pump/waterpump for the ls bottom end will be enough to cool and lubricate for this setup
#2
99crx page
Join Date: Aug 2007
Location: northern virginia
Posts: 275
Likes: 0
Received 0 Likes
on
0 Posts
Re: obd0 or obd1
i have a 93 DA i am planning on putting ls/vtec into the car the ls/vtec motor has an obd0 b16 head with a 91 bottm end i am wondering which intake manifold will it require a friend said that a obd1 intake manifold would work because the car is a 93 but just want to know before before i end up getting the wrong intake manifold. i am also wondering if the stock oil pump/waterpump for the ls bottom end will be enough to cool and lubricate for this setup
i would use any b16 intake manifold it doesnt matter
as long as you use all ur sensors from obd0. oil, and water pump u should use gsr but make sure u use a gsr timing belt with gsr water pump cuz if not the other belts wont fit.note i would get a aftermarket intake whatsn ur loc cuz im in nova i can tell u where to get one here but if not look for power plus brand
Thread
Thread Starter
Forum
Replies
Last Post
oduhockey9
Parts ARCHIVE
41
11-03-2008 09:00 AM