|
obd0 or obd1
i have a 93 DA i am planning on putting ls/vtec into the car the ls/vtec motor has an obd0 b16 head with a 91 bottm end i am wondering which intake manifold will it require a friend said that a obd1 intake manifold would work because the car is a 93 but just want to know before before i end up getting the wrong intake manifold. i am also wondering if the stock oil pump/waterpump for the ls bottom end will be enough to cool and lubricate for this setup
|
Re: obd0 or obd1
Originally Posted by 00si
(Post 3614898)
i have a 93 DA i am planning on putting ls/vtec into the car the ls/vtec motor has an obd0 b16 head with a 91 bottm end i am wondering which intake manifold will it require a friend said that a obd1 intake manifold would work because the car is a 93 but just want to know before before i end up getting the wrong intake manifold. i am also wondering if the stock oil pump/waterpump for the ls bottom end will be enough to cool and lubricate for this setup
i would use any b16 intake manifold it doesnt matter as long as you use all ur sensors from obd0. oil, and water pump u should use gsr but make sure u use a gsr timing belt with gsr water pump cuz if not the other belts wont fit.note i would get a aftermarket intake whatsn ur loc cuz im in nova i can tell u where to get one here but if not look for power plus brand |
Re: obd0 or obd1
please close
|
| All times are GMT -8. The time now is 08:42 PM. |
© 2024 MH Sub I, LLC dba Internet Brands