its a wet system, and im just trying to figure out the best place to get the fuel from. i dont have any of the fittings to splice into the fuel line though. does anyone know where to get them from?

 

I believe your supposed to utilize either the return line OR clamp the return which is supposed to up the pressure with the regular fuel system to accomodate the N2O but you should probably check on their site and see what they recommend...

 

If you dont have any other fittings, spend the money and get the proper fittings to do so. You tap the fuel source from the feedline off the fuel filter to your fuel rail. You can buy a simple t barb if you must but flare fittings would be my way of doing it. Unless of course you have an after market rail when in most cases it has a closed fitting off the return end that you can run a feedline from.
If i were you i would find somebody who has done them before, because in most cases its not something you want to mess around with blind.

 

i got a aem fuel rail and never even thought about the closed fitting. just woundering, what could happen if i installed it myself? everything just bolts on nothing to major. if you have alot of experience with this shit and know some problems i might run into please let me know.

thanks man