lk2drft

I jut bought a gsr teggy and it came with a bunch of parts. The thing I am trying to find out is some info on the extra head that came with the car. The guy who I bought it from said it was a ITR head. I have no idea because it is a bare head.The only thing on it is the casting codes. They are in order 0/0 0/6 1/5 pr3-3.Does anyone know what head this is?

BAN HAMMER

I bet fucking google knows what it is. And its "integra" not "teggy".

Mau5head

B16 head. A Type-R head has P-73 Stamped on it. Does it have dual valve springs?

lk2drft

donkeypunch shut the fuck up.I asked a simple question because I could not find information on it. I have already looked online, through fourms, called the dealer to see if they could tell me by the casting number and took it to a couple machine shops so no google does not fucking know and I can call it a teggy if I damn well please.

Not sure if it came with dual springs because the head has nothing on it at all

RandomTask

Prepare your anus.

-JB-

You suck at searching then. I found the info in 5seconds on a google search

http://honda-tech.com/showthread.php?t=898679

So with that said, should either be a green dot, or you'll have to check the cams if they are oem.

BAN HAMMER

FYI people that call it a teggy are faggots.

Guess I proved my point.

Also, I figured otu what it was in 5 second by googleing the casting codes. It gives you the year and month it was casted. It's a B16, hence the PR3-3 code.

Dipshit.

PR3-X = B16A/ITR family cast
PR3-4 = B16A
PR3-3 = ITR

PR3 1989-1991 Integra XSi/RSi
PR3-J00 1992 Integra JDM B16A EF 8/9
PR3-J51 1992 Integra JDM B16A EF 8/9
PR4 1990-1993 Integra LS/GS
PR4 1996-1999 Integra LS/GS/RS (B18B)

-JB-

ITR/b16 heads could have the same stamp because both were used on the each motor, however the ITR had some extra treatment to it to make it an ITR head, so going by the stamp isn't always correct.
Ways to identify an ITR/CTR head

* the green paint by the distributor
* thinner ITR intake valvestem (12% lighter vs GSR/Si valve)
* minor port work by the valve seat in the ports
* dual valve springs on both sides (b16a civic and b18c1 gsr heads have only single spring on exhaust side not dual), notice yellow paint on intake side, blue on exhaust side
* lost motion assembly has a blue dot

Alkaline8214

Goggle CAN NOT fail you....only U can fail Google. Lol

Mau5head

You must spread some Reputation around before giving it to Alkaline8214 again.