mini-me question...
#1
It has 4 Doors...
Thread Starter
Join Date: Nov 2002
Location: Fredericksburg,Va
Posts: 326
Likes: 0
Received 0 Likes
on
0 Posts
mini-me question...
ok on a D15 block I know you have it drilled for the oil feed for the Vtec head but is there a way to feed that w/ an external oil line? I mean I haven't done alot of reasearch on it yet so thought I would ask...
Any info would be great...thanks for looking
Any info would be great...thanks for looking
#2
corona connessuer
Join Date: Nov 2002
Location: GUAM
Posts: 3,425
Likes: 0
Received 0 Likes
on
0 Posts
Re: mini-me question...
Originally posted by Whtehnda93DXSdn
ok on a D15 block I know you have it drilled for the oil feed for the Vtec head but is there a way to feed that w/ an external oil line? I mean I haven't done alot of reasearch on it yet so thought I would ask...
Any info would be great...thanks for looking
ok on a D15 block I know you have it drilled for the oil feed for the Vtec head but is there a way to feed that w/ an external oil line? I mean I haven't done alot of reasearch on it yet so thought I would ask...
Any info would be great...thanks for looking
thats the biggest wad of incorrect information that i have ever seen!
the only thing that you have to do is remove the oil control jet from the rear center head bolt hole(in the block) and use a 96-00 civic head gasket.
this is actually a very easy and strait forward deal.
#4
sumospeedDOTcom
Join Date: Nov 2002
Location: Newport News
Posts: 9,891
Likes: 0
Received 0 Likes
on
0 Posts
do you have all the parts? if so pay me 400 bucks and ill put it all together and make it run perfect... until it blows up
(of course i would take 300 of that 400 and give it to mike to do all the work )
chahonda does great work, just wish he worked a tad bit faster
(of course i would take 300 of that 400 and give it to mike to do all the work )
chahonda does great work, just wish he worked a tad bit faster
#6
corona connessuer
Join Date: Nov 2002
Location: GUAM
Posts: 3,425
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by NoReverse
do you have all the parts? if so pay me 400 bucks and ill put it all together and make it run perfect... until it blows up
(of course i would take 300 of that 400 and give it to mike to do all the work )
chahonda does great work, just wish he worked a tad bit faster
do you have all the parts? if so pay me 400 bucks and ill put it all together and make it run perfect... until it blows up
(of course i would take 300 of that 400 and give it to mike to do all the work )
chahonda does great work, just wish he worked a tad bit faster
and thanks for the compliments. mini-me's a can be a very stout little motor!!!
Thread
Thread Starter
Forum
Replies
Last Post