Mil Code 9...Need Help!!!
#1
Registered Member
Thread Starter
Join Date: Oct 2007
Posts: 263
Likes: 0
Received 0 Likes
on
0 Posts
Mil Code 9...Need Help!!!
Okay. I got a 97 integra with a 2001 gsr swap into it. Everything is running right, but check engine light comes on. When I read the mil code on the check engine light. It shows Code 9..Its something about the distributor. So I bought a new obd2 gsr distributor for the car, but that code is still there..Anyone knows how to fix that problem. I reset the ecu and everything, but it still throwing the code..Need help..
#2
Registered member
Join Date: Jun 2005
Location: 757
Posts: 1,640
Likes: 0
Received 0 Likes
on
0 Posts
Re: Mil Code 9...Need Help!!!
did u ever find a fix for this? please update if not here is a link on how to fix your car.
http://www.honda-tech.com/zerothread...ostid=34712196
copy and paste
http://www.honda-tech.com/zerothread...ostid=34712196
copy and paste
#3
Racetracks
Join Date: Nov 2002
Location: How long is a piece of string?
Posts: 15,668
Likes: 0
Received 0 Likes
on
0 Posts
Re: Mil Code 9...Need Help!!!
Okay. I got a 97 integra with a 2001 gsr swap into it. Everything is running right, but check engine light comes on. When I read the mil code on the check engine light. It shows Code 9..Its something about the distributor. So I bought a new obd2 gsr distributor for the car, but that code is still there..Anyone knows how to fix that problem. I reset the ecu and everything, but it still throwing the code..Need help..
The above link may solve your problem, if you're using the 2001 ECU and your stock harness is missing the wires for the CKF (crank fluctuation sensor). If you're using the wiring harness that came with your 2001 swap, that likely isn't your problem, but check anyway. Think about which harnesses are stock, and which you've replaced from the swap.
If you are using the 2001 ECU, and the wires for the CKF are missing, you just need to add those and don't need to bypass anything.
Thread
Thread Starter
Forum
Replies
Last Post