MAS help
#1
Big Poppa
Thread Starter
Join Date: Nov 2002
Location: Chesterfield/Richmond
Posts: 720
Likes: 0
Received 0 Likes
on
0 Posts
MAS help
car is a 97 eclipse gsx
installed another mas on the car, car still idles like shit after about 15 min of running, any clue?
also the engine throws the mas code again, even after ecu has been cleared.
upon installation of new mas, car ran fine
installed another mas on the car, car still idles like shit after about 15 min of running, any clue?
also the engine throws the mas code again, even after ecu has been cleared.
upon installation of new mas, car ran fine
#2
Bitches get Stitches
Join Date: Mar 2003
Location: Chesapeake
Posts: 3,959
Likes: 0
Received 0 Likes
on
0 Posts
wait, you said the car idled like shit after the new mas went in, and then you said the car ran fine after you put a new mas in?
my girl has 97 gsx as well. her MAS went bad and was throwing a CEL, but the car was running fine. i put a new one in and the car stopped throwing the CEL...so maybe your old MAF is bad?
my girl has 97 gsx as well. her MAS went bad and was throwing a CEL, but the car was running fine. i put a new one in and the car stopped throwing the CEL...so maybe your old MAF is bad?
#3
Big Poppa
Thread Starter
Join Date: Nov 2002
Location: Chesterfield/Richmond
Posts: 720
Likes: 0
Received 0 Likes
on
0 Posts
ok sorry, first part was copied from my post on my home board.
we put on the new mas, and it idled fine until we reved it a bit, adjusted the biss (base idle screw set) and pull it out of the garage.
it started to idle funky once we got it moving
we put on the new mas, and it idled fine until we reved it a bit, adjusted the biss (base idle screw set) and pull it out of the garage.
it started to idle funky once we got it moving
#4
Bitches get Stitches
Join Date: Mar 2003
Location: Chesapeake
Posts: 3,959
Likes: 0
Received 0 Likes
on
0 Posts
possibly because it got warm when you started to drive it around? im not really a DSM guy, one of them should be able to help you more. try waiting till it's warm and set the idle to 800 with the BISS with the new MAF in and see how it drives.
#5
Big Poppa
Thread Starter
Join Date: Nov 2002
Location: Chesterfield/Richmond
Posts: 720
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by sk8rmike
possibly because it got warm when you started to drive it around? im not really a DSM guy, one of them should be able to help you more. try waiting till it's warm and set the idle to 800 with the BISS with the new MAF in and see how it drives.
possibly because it got warm when you started to drive it around? im not really a DSM guy, one of them should be able to help you more. try waiting till it's warm and set the idle to 800 with the BISS with the new MAF in and see how it drives.
Thread
Thread Starter
Forum
Replies
Last Post