Integra problem: Knocking the studs out
#1
Now Riding Dirty
Thread Starter
Join Date: Mar 2003
Location: Richmond, VA
Posts: 162
Likes: 0
Received 0 Likes
on
0 Posts
Integra problem: Knocking the studs out
My lug nuts came loose and broke one of the studs and bend the other to hell and im trying to knock out the studs but i cant get the bracket that is holding the studs off of the car. I got the 35mm nut out but the bracket does not seem to want to come off the car. I used a puller and it just pushed the drive axle back into the hole and the bracket is still stuck there. Im in a world of shit here i need some help.
#6
Bitches get Stitches
Join Date: Mar 2003
Location: Chesapeake
Posts: 3,959
Likes: 0
Received 0 Likes
on
0 Posts
Re: Integra problem: Knocking the studs out
you dont have to take the hub off for new stock studs. just take a grinder and grind the side of one side of the new stud kinda flat and it'll fit in on the frontside (side towards the front of the car) of the hub, just spin the hub for each new stud you're replacing, and use an old lugnut to pull the studs in.
#7
Now Riding Dirty
Thread Starter
Join Date: Mar 2003
Location: Richmond, VA
Posts: 162
Likes: 0
Received 0 Likes
on
0 Posts
Re: Integra problem: Knocking the studs out
Thanks for the help i got it all fixed up today, my mechanic freind came by and helped me out. Working with 1/4 of the tools i needed was my problem. I need to invest in some tools.
Thread
Thread Starter
Forum
Replies
Last Post
2 LATE U LOSE
Want to Buy / Trade ARCHIVE
8
04-07-2008 03:15 AM