installing jdm climate control
09-27-2003, 12:11 PM
#1
Registered User
Thread Starter
Join Date: Feb 2003
Location: va beach
Posts: 27
Likes: 0
Received 0 Likes
on
0 Posts
installing jdm climate control
i dont know how to take the deck out so i can get to the climate control and i heard that i need to take the face out of both of them and switch it...please help
09-29-2003, 11:09 AM
#8
All-Motor Street Car
Join Date: Sep 2003
Posts: 828
Likes: 0
Received 0 Likes
on
0 Posts
I installed my JDM Climate Control...you're in for some fun...lucky for me, I changed my interior from blue to black, so I had the dash out of the car to do it. There are several screws behind the climate control that you have to remove to do this. I recommend you take the dash out (its not as hard as it sounds)
As for the face...you have to take th JDM face off and put it on your USDM cc body...not hard, just takes time...let me know if you need any more info or you want some help!!
As for the face...you have to take th JDM face off and put it on your USDM cc body...not hard, just takes time...let me know if you need any more info or you want some help!!
09-29-2003, 06:57 PM
#9
Registered User
Thread Starter
Join Date: Feb 2003
Location: va beach
Posts: 27
Likes: 0
Received 0 Likes
on
0 Posts
i heard you have to take the deck out to be able to get to the climate control and i think i need those two prongs to take my kenwood deck out because it's an aftermarket deck...I just need to borrow those prongs so i can take it out
09-30-2003, 04:38 AM
#10
All-Motor Street Car
Join Date: Sep 2003
Posts: 828
Likes: 0
Received 0 Likes
on
0 Posts
I promise its going to be more difficult than that...the screws on the back of the climate control are not only hard to find, but hard to get to and turn...
To take your cd player out, you can either go to a stereo shop (they should just give you a pair) or you can use a small flat blade screwdriver to slide in the slot on each side and push OUTWARD to release the latches...good luck!!
To take your cd player out, you can either go to a stereo shop (they should just give you a pair) or you can use a small flat blade screwdriver to slide in the slot on each side and push OUTWARD to release the latches...good luck!!