Honda Manual Tranny question
#1
Registered Member
Thread Starter
Join Date: Sep 2003
Location: Virginia Beach
Posts: 616
Likes: 0
Received 0 Likes
on
0 Posts
Honda Manual Tranny question
I don't know much about these things except how to take them off and put them on. Yesterday at the track on the first run I toasted my clutch....No big deal expected it to happen. About three runs later, I started getting a grind going into third AND 4th. Both on the same run. First thought is synchros, but I just think it's a little weird they both went at the same time. It happens at anything above like 3500 rpms, so even normal driving it's annoying. Any other ideas on what it might be?
#3
Registered Member
Thread Starter
Join Date: Sep 2003
Location: Virginia Beach
Posts: 616
Likes: 0
Received 0 Likes
on
0 Posts
Re: Honda Manual Tranny question
Originally Posted by sk8rmike
pressure plate going bad most likely from excessive heat from the clutch going bad.
#4
Registered Member
Join Date: Jun 2003
Location: Mississauga, Ontairo, Canada
Posts: 481
Likes: 0
Received 0 Likes
on
0 Posts
Re: Honda Manual Tranny question
Best things to do is take the tranny off one day when you got a few hours to spare, and examine the clutch and preasure plate. Well hope you fix your problem.
#6
Team Ultraspeed
Join Date: Nov 2002
Location: Nonya (hint: VaBch)
Posts: 1,148
Likes: 0
Received 0 Likes
on
0 Posts
Re: Honda Manual Tranny question
Your 3rd & 4th shift ring is going bad...well that and the surface area on the shifting mechanism probably has nice worn spots in them. Both can easily be bought from your local friend Honda dealership.
Thread
Thread Starter
Forum
Replies
Last Post