Just a quick question since i couldn't figure it out by ... is there a difference between the control arms on an ITR versus an EG with factory sway bars or gsr?

thanks

 

are u talking bout the control arms or the sways bars ??

 

The front control arms are the same, the rears are different on the ITR.

 

ITR rear controls arms are different from civics and integras. If you want to put a front sway on a non EX/Si EG, any DC front control arm will work.

I might have a pair of ITR front lca's if you are interested.

 

the shick goes inside of a itr lca and the shock on a eg/dc/ek goes around the lca

pics for reference

itr



eg/dc


and ek stock lca's are a little thinner than the eg/dc

 

yeah sorry i just needed to know about the FRONT lower control arms, i knew the rears were different. the reason i was asking is because i just got an ITR front sway bar and i'm going to put it in my EG. i got the rear one too but i'm installing that with new rear lca's and an ASR brace so no worries on the back end.

Bentvalve i'll send you a pm about those front lca's. its either that or i'm going to weld some really heavy duty mounts on my stock arms.

thanks for the help a ya'll